iptables -I INPUT -p udp --dport 6566 -j ACCEPT

iptables -I OUTPUT -p tcp --dport 6566 -j ACCEPT

iptables -I OUTPUT -p udp --dport 6566 -j ACCEPT

iptables -I INPUT -p tcp --dport 6566 -j ACCEPT

iptables -I OUTPUT -p tcp --dport 6566 -j ACCEPT

iptables -I INPUT -p udp --dport 6566 -j ACCEPT

iptables -I OUTPUT -p udp --dport 6566 -j ACCEPT

service saned

{

type = UNLISTED

port = 6566

socket_type = stream

server = /opt/sbin/saned

protocol = tcp

user = root

group = root

wait = no

disable = no  

}

cat /etc/iptables

root@Asus:/tmp/home/root# cat /etc/iptables

*mangle

:PREROUTING ACCEPT [0:0]

:OUTPUT ACCEPT [0:0]

-I PREROUTING -i vlan2 -j DSCP --set-dscp 0

-I FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu

-A PREROUTING -i vlan2 -d 192.168.17.1/255.255.255.0 -j DROP

COMMIT

*nat

:PREROUTING ACCEPT [0:0]

:POSTROUTING ACCEPT [0:0]

:OUTPUT ACCEPT [0:0]

:WANPREROUTING - [0:0]

-A PREROUTING -d 87.99.9.29 -j WANPREROUTING

-A WANPREROUTING -p icmp -j DNAT --to-destination 192.168.17.1

-A WANPREROUTING -p tcp  --dport 63666 -j DNAT --to-destination 192.168.17.70

-A WANPREROUTING -p udp  --dport 63666 -j DNAT --to-destination 192.168.17.70

-A POSTROUTING  -o vlan2 -j MASQUERADE

-A POSTROUTING -o br0 -s 192.168.17.1/255.255.255.0 -d 192.168.17.1/255.255.255.0 -j SNAT --to-source 192.168.17.1

COMMIT

*filter

:INPUT DROP [0:0]

:OUTPUT ACCEPT [0:0]

-A INPUT -m state --state INVALID -j DROP

-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT

-N shlimit

-A shlimit -m recent --set --name shlimit

-A shlimit -m recent --update --hitcount 4 --seconds 60 --name shlimit -j DROP

-A INPUT -p tcp --dport 63667 -m state --state NEW -j shlimit

-N wwwlimit

-A wwwlimit -m recent --set --name www

-A wwwlimit -m recent --update --hitcount 15 --seconds 5 --name www -j DROP

-A INPUT -p tcp --dport 8081 -m state --state NEW -j wwwlimit

-A INPUT -i lo -j ACCEPT

-A INPUT -i br0 -j ACCEPT

-A INPUT -p tcp  --dport 8081 -j ACCEPT

-A INPUT -p tcp  --dport 63667 -j ACCEPT

:FORWARD DROP [0:0]

-A FORWARD -i br0 -o br0 -j ACCEPT

-A FORWARD -m state --state INVALID -j DROP

:wanin - [0:0]

:wanout - [0:0]

-A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT

-A FORWARD -i vlan2 -j wanin

-A FORWARD -o vlan2 -j wanout

-A FORWARD -i br0 -j ACCEPT

-A wanin  -p tcp -m tcp -d 192.168.17.70 --dport 63666 -j ACCEPT

-A wanin  -p udp -m udp -d 192.168.17.70 --dport 63666 -j ACCEPT

COMMIT

root@Asus:/tmp/home/root#

root@Asus:/tmp/home/root# scanimage -L

device `hpaio:/usb/Deskjet_1510_series?serial=CN3AT1NGJ905XJ' is a Hewlett-Packard Deskjet_1510_series all-in-one

root@Asus:/tmp/home/root#

SaneTwain is only available in a 32-bit version, and the TWAIN datasource does not seem to work properly in a 64-bit Windows. 64-bit versions of SaneTwain are not in the planning - too much work and too costly a compiler-upgrade.

Version 0.9.5418

-Fixed installation to incorrect TWAIN folder in 32-bit Windows and unified 32-bit and 64-bit installers

Installers are available on the Files page now, so the information below is for historical reference only.



Standalone:



Create a folder anywhere you like ("C:\Program Files\SaneWin" for example). Copy into that folder the following files:

SANEWin.exe

SANEWinDS.dll

INIFile.dll

iTextSharp.dll

NLog.dll

NLog.config



TWAIN Data Source:



In the Windows TWAIN folder ("C:\Windows\twain_32" on 64 bit Windows, "C:\Windows\twain" on 32 bit Windows) create a new folder named SANEWinDS. Copy into that folder the following files:

SANEWinCDS32.ds

SANEWinDS.dll

INIfile.dll

NLog.dll

NLog.config



TWAIN should now see SANEWinDS as a data source. If you are installing to a Citrix XenApp server, disable TWAIN redirection in your Citrix policy. It only gets in the way.

"Nie można nawiązać połączenia ponieważ komputer docelowy aktywnie go odmawia 192.XXX.XX.1:6566" - komunikat SANEWinDS

Aug 20 07:45:00 Asus kern.info kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2

Aug 20 07:45:00 Asus kern.info kernel: scsi0 : usb-storage 2-1:1.0

Aug 20 07:45:01 Asus kern.notice kernel: scsi 0:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4

Aug 20 07:45:01 Asus kern.notice kernel: sd 0:0:0:0: [sda] 3932160 512-byte logical blocks: (2.01 GB/1.87 GiB)

Aug 20 07:45:01 Asus kern.notice kernel: sd 0:0:0:0: [sda] Write Protect is off

Aug 20 07:45:01 Asus kern.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00

Aug 20 07:45:01 Asus kern.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through

Aug 20 07:45:01 Asus kern.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through

Aug 20 07:45:01 Asus kern.info kernel:  sda: sda1

Aug 20 07:45:01 Asus kern.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through

Aug 20 07:45:01 Asus kern.notice kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk

Aug 20 07:45:01 Asus user.info hotplug[27248]: USB ext3 fs at /dev/sda1 mounted on /tmp/mnt/ENTWARE

Aug 20 07:45:01 Asus kern.info kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 

Aug 20 07:45:02 Asus user.debug wsdd2[969]: 'Terminated' signal received.

Aug 20 07:45:02 Asus user.info wsdd2[969]: terminating.

Aug 20 07:45:02 Asus user.info preinit[1]: Samba daemon is started

Aug 20 07:45:02 Asus user.info wsdd2[27262]: starting.

Aug 20 07:45:34 Asus kern.info kernel: usb 2-2: new high speed USB device using ehci_hcd and address 3

Aug 20 07:45:34 Asus kern.info kernel: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC111