> adsl> status
ADSL Firmware version ANNEX_A CPE 41000
OP state ShowTime
Last Failed Status (0)
Start Progress ad
Watchdog Timer 53
DownStream Noise Margin 30 dB
Local Attenuation 32 dB
Remote Attenuation 21 dB
Coding Gain 3 dB
Cell TxCount 146
Cell RxCount 0
Line code G.DMT
Framing_Overhead_actual 3 Trellis < Enabled >
AS0_Dn_Bytes_Actual 1312 kbps AS0_Dn_Latency_Actual < Fast >
LS0_Up_Bytes_Actual 320 kbps LS0_Up_Latency_Actual < Fast >
Fast_R_Up_Actual 0 Interleave_S_Up_Actual 1
Interleave_D_Up_Actual 1 Interleave_R_Up_Actual 0
Fast_R_Dn_Actual 0 Interleave_S_Dn_Actual 1
Interleave_D_Dn_Actual 1 Interleave_R_Dn_Actual 0
> adsl> show
ADSL setting : Current Ineffective
-------------------------------------------------------------------
Local line code G.DMT G.DMT
Trellis encoding Enabled Enabled
EC/FDM mode FDM
Coding gain AUTO AUTO
Transmit Power Attenuation 0 dB 0 dB
Tx Start bin 6 (H) 6 (H)
Tx End bin 1f (H) 1f (H)
Rx Start bin 20 (H) 20 (H)
Rx End bin ff (H) ff (H)
Type "home" and then "save" to effect setting
> adsl> home
Command:
adsl - entry to ADSL menu
default - set all configuration to factory setting
lan - entry to Ethernet menu
list - list status for enabled PVC
manage - entry to management menu
mode - exit this menu and change modem mode
ping - ping IP for testing purpose
quick - quick setup
r1483 - entry to RFC1483 menu
restart - reboot modem
save - save and restart modem
show - display configuration of PVC and Ethernet
ver - display software version
In case of any parameter change, please 'save' to enable.
Type 'help' or 'help
' for more details
>> show
Ethernet ip: 10.0.0.1
Subnet mask: 255.255.255.0
FullDuplex
isabled
FUNCTION VPI/VCI CLASS LLC/VCMUX Spanning Pkt Filter
Rfc1483 0/35 ubr LLC Disable ANY
' target='_blank'>Link
