RedBoot> ip_address -l 192.168.1.254/24 -h 192.168.1.200

IP: 192.168.1.254/255.255.255.0, Gateway: 0.0.0.0

Default server: 192.168.1.200

RedBoot> fis list

Name FLASH addr Mem addr Length Entry point

RedBoot 0xA8000000 0xA8000000 0x00030000 0x00000000

rootfs 0xA8030000 0xA8030000 0x00700000 0x00000000

FIS directory 0xA87E0000 0xA87E0000 0x0000F000 0x00000000

RedBoot config 0xA87EF000 0xA87EF000 0x00001000 0x00000000

RedBoot> fis init -f

About to initialize [format] FLASH image system - continue (y/n)? y

*** Initialize FLASH Image System

... Erase from 0xa8030000-0xa87e0000: .......................................... ................................................................................ .

... Erase from 0xa87e0000-0xa87f0000: .

... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .

RedBoot> load -r -b 0x80041000 openwrt-atheros-2.6-root.jffs2-64k

Using default protocol (TFTP)

Raw file loaded 0x80041000-0x80220fff, assumed entry at 0x80041000

RedBoot> fis create -b 0x80041000 -f 0xA8030000 -l 0x006F0000 -e 0x00000000 rootfs

... Erase from 0xa8030000-0xa8720000: .................................................................................. .............................

... Program from 0x80041000-0x80731000 at 0xa8030000: .................................................................. .............................................

... Erase from 0xa87e0000-0xa87f0000: .

... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .

RedBoot> load -r -b 0x80041000 openwrt-atheros-2.6-vmlinux.lzma

Using default protocol (TFTP)

Raw file loaded 0x80041000-0x80100fff, assumed entry at 0x80041000

RedBoot> fis create -r 0x80041000 -e 0x80041000 vmlinux.bin.l7

... Erase from 0xa8720000-0xa87e0000: ............

... Program from 0x80041000-0x80101000 at 0xa8720000: ............

... Erase from 0xa87e0000-0xa87f0000: .

... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .

RedBoot> fis load -l vmlinux.bin.l7

Image loaded from 0x80041000-0x80290084

RedBoot> exec

RedBoot> fis free

  0xA80F0000 .. 0xA87E0000

0x6F0000

RedBoot> fis create -l 0x6F0000 rootfs

Name is too long, must be less than 16 chars

fis create -l 0x006F0000 rootfs

RedBoot> fis create -l 0x006F0000 rootfs

... Erase from 0xa80f0000-0xa87e0000: ...............................................................................................................

... Program from 0x80040800-0x801e0800 at 0xa80f0000: ..........................

... Erase from 0xa87e0000-0xa87f0000: .

... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .

RedBoot> reset

+PHY ID is 0022:5521

... waiting for BOOTP information

Ethernet eth0: MAC address 00:18:84:25:4e:3c

Can't get BOOTP info for device!



RedBoot(tm) bootstrap and debug environment [ROMRAM]

Non-certified release, version v1.3.0 - built 16:57:58, Aug  7 2006



Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.



Board: ap51

RAM: 0x80000000-0x81000000, [0x80040450-0x80fe1000] available

FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.

RedBoot>

RedBoot> fconfig

Run script at boot: true

Boot script:

.. fis load -l vmlinux.bin.l7

.. exec

Enter script, terminate with empty line

>> fis load -l linux

>> exec

>>

Boot script timeout (1000ms resolution): 10

Use BOOTP for network configuration: false

Gateway IP address:

Local IP address: 192.168.1.254

Local IP address mask: 255.255.255.0

Default server IP address: 

Console baud rate: 9600

GDB connection port: 9000

Force console for special debug messages: false

Network debug at boot time: false

Update RedBoot non-volatile configuration - continue (y/n)? y

... Erase from 0xa87e0000-0xa87f0000: .

... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .

RedBoot>reset